Introduction
Plumbing issues can cause major inconvenience and, if left unchecked, can lead to costly repairs. Whether it’s a leaking pipe, clogged drain, low water pressure, or a running toilet, knowing how to identify and fix these problems can save time and money. In regions like Darbhanga, Bihar, India, where reliable plumbing systems are crucial for homes and businesses, understanding common plumbing problems and their solutions is essential.
This detailed guide will help you diagnose and fix the most common plumbing issues, ensuring a smooth and efficient water supply system using high-quality materials like PVC, HDPE, and MDPE pipes manufactured as per ISI standards.
- Low Water Pressure
Common Causes:
✔ Sediment and mineral buildup in pipes, reducing flow rate
✔ Faulty pressure regulators that impact the overall water supply
✔ Leaking pipes or partially closed valves disrupting pressure
✔ Clogged aerators and showerheads due to hard water deposits
Effective Solutions:
✔ Check for Leaks – Inspect exposed pipes, walls, and ceilings for visible leaks. Hidden leaks may require professional inspection.
✔ Clean Aerators & Showerheads – Unscrew the aerator or showerhead and soak it in vinegar to dissolve mineral deposits.
✔ Check Pressure Regulators – If your pressure is inconsistent, a faulty regulator might be the issue. Seek expert help if needed.
✔ Upgrade Old Pipes – Replace outdated iron or corroded pipes with HDPE or PVC pipes from Raghav Pipes for long-lasting performance.
- Leaking Pipes & Faucets
Common Causes:
✔ Worn-out washers, seals, or O-rings in faucets
✔ Pipe corrosion, cracks, or joint damage due to aging
✔ High water pressure straining pipe joints and fittings
✔ Loose pipe connections leading to water seepage
Effective Solutions:
✔ Replace Washers & Seals – If your faucet is dripping, changing the washer or O-ring typically solves the issue.
✔ Tighten Pipe Connections – Use a pipe wrench to secure loose joints and prevent leaks.
✔ Seal Small Cracks – Apply waterproof plumbing tape or pipe sealant for minor leaks.
✔ Use Leak-Proof Pipes – Install HDPE, MDPE, or PVC pipes from Raghav Pipes, which are resistant to leaks and corrosion.
- Clogged Drains & Pipes
Common Causes:
✔ Accumulation of grease, food waste, soap scum, and hair
✔ Tree root intrusion into underground drainage systems
✔ Buildup of dirt, debris, and solid waste in drainpipes
✔ Faulty or outdated plumbing materials causing frequent blockages
Effective Solutions:
✔ Use a Plunger – A standard sink or toilet plunger can help remove minor blockages.
✔ Pour Boiling Water & Baking Soda – This combination breaks down grease and organic matter clogging pipes.
✔ Use Drain Snakes or Augers – A plumbing snake helps remove deeper clogs in drains.
✔ Install Anti-Clog Pipes – Use smooth-finish PVC pipes from Raghav Pipes to prevent future blockages.
- Running Toilets
Common Causes:
✔ Faulty or worn-out flapper valve causing continuous water flow
✔ Misadjusted float ball or fill valve overfilling the tank
✔ Damaged or disconnected fill tube leading to improper flushing
✔ Silent leaks from cracks in the flush system
Effective Solutions:
✔ Replace the Flapper Valve – A damaged flapper is the main culprit in most running toilets.
✔ Adjust the Float Ball or Fill Valve – If the float is set too high, adjust it to stop water overflow.
✔ Check & Replace the Fill Tube – Ensure proper connection to the overflow pipe.
✔ Upgrade Plumbing Fixtures – Choose leak-proof plumbing accessories for long-lasting performance.
- Water Tank Overflow Issues
Common Causes:
✔ Faulty float valve failing to shut off water supply
✔ Malfunctioning water pump automation leading to excess water flow
✔ Blocked overflow pipes preventing drainage
✔ Excessive water pressure from supply lines
Effective Solutions:
✔ Inspect & Replace Float Valves – If the float valve is stuck or broken, replace it.
✔ Install Automatic Water Level Controllers – These systems automatically turn off the water supply when the tank is full.
✔ Clear Overflow Pipes – Regularly clean and ensure proper drainage from overflow outlets.
✔ Use Raghav Water Tanks – Our multi-layer, rotomolded plastic tanks prevent unnecessary water loss and overflow.
- Burst Pipes in Extreme Weather
Common Causes:
✔ Water freezing in pipes, expanding and causing them to burst
✔ Weak pipe joints and outdated materials unable to handle pressure
✔ Sudden high-pressure surges damaging old plumbing
✔ Use of non-durable or poor-quality pipes
Effective Solutions:
✔ Insulate Pipes – Use pipe insulation wraps to protect pipes from extreme temperatures.
✔ Use Flexible Pipes – HDPE pipes from Raghav Pipes withstand extreme weather and pressure variations.
✔ Reduce Water Pressure – Install a pressure regulator to avoid excessive strain.
✔ Replace Weak Pipes – Use modern, high-pressure-resistant materials for longevity.
Conclusion
Plumbing problems are common, but proactive maintenance and high-quality materials can prevent costly repairs. Whether it’s low water pressure, leaking pipes, or clogged drains, early diagnosis and proper fixes help ensure efficient water supply systems. Using high-quality plumbing materials, like PVC, HDPE, and MDPE pipes manufactured as per ISI standards from Raghav Pipes, guarantees long-term reliability and hassle-free plumbing.